From here you can start the WFS Arbitrator GUI, AdSec Arbitrator GUI, and WFS Hardware GUI.
cd $ADOPT_ROOT/bin
./ao_start
./startAO &
./ao_stop (check to make sure no -2010 error at end of output. If so, run again)
Controls WFS hardware: WUnit board components and flower box.
Warning: When binning CCD, DO NOT reselect same binning. Doing so will wipe calib files!
Then set up DM control. See Arcetri's guide for operating the DM.
from LBTIENG@obs4: IIFGUI &
Displays current telescope information such as: authorized instrument, pointing, status of mirrors and commands sent.
Comments